Shortbus 2.0 - Part 2

The Shortbus 2.0 is done! Ended up at 5' 11" x 22" x 2 7/8" Just dropped it off at the Maya shop yesterday for glass! He said it should be ready in a couple weeks.

Picking up where the last post left off after mapping out the rail bands I got to work mowing foam in my new sideyard LaBoardatory. I found a lot of helpful info, drawings and diagrams on http://greenlightsurfsupply.com/pages/greenlight-surfboard-building-guide-a-z 

I used their boxy rail band instructions as a guide as well as some advice from Malcolm Knight of LongToe Surfboards based out of Charleston, SC. I found him on the Instagram a while back and really enjoy seeing the shapes he creates. He recommended drawing rail bands on the deck at 2 and 4 inches in from the rail. Really stoked on how the rails turned out. Here's a few shots of the process...

Slight hull on the underside...

Rails all done...

Had a little fun with the tail. My version of the "Arc Swallow Tail" that Manuel Caro puts on a lot of his Mandala shapes. Check out his website: http://mandalacustomshapes.com

Mapping out the fins and concaves...

Lots of sanding...

Finished product:

Deck is flat and rails turn down at 4 inches from each rail.

Rocker...Tail thins down quite a bit.

Bottom...subtle double concaves. 

Hull entry...

Outline...

Can't wait to see how the glass job turns out. He's going to have some fun with these colors...

Until next time.

Stay stoked!

-James