Friday, August 28, 2015

Shortbus 2.0 - Part 2

The Shortbus 2.0 is done! Ended up at 5' 11" x 22" x 2 7/8" Just dropped it off at the Maya shop yesterday for glass! He said it should be ready in a couple weeks.

Picking up where the last post left off after mapping out the rail bands I got to work mowing foam in my new sideyard LaBoardatory. I found a lot of helpful info, drawings and diagrams on http://greenlightsurfsupply.com/pages/greenlight-surfboard-building-guide-a-z 
I used their boxy rail band instructions as a guide as well as some advice from Malcolm Knight of LongToe Surfboards based out of Charleston, SC. I found him on the Instagram a while back and really enjoy seeing the shapes he creates. He recommended drawing rail bands on the deck at 2 and 4 inches in from the rail. Really stoked on how the rails turned out. Here's a few shots of the process...



Slight hull on the underside...

Rails all done...


Had a little fun with the tail. My version of the "Arc Swallow Tail" that Manuel Caro puts on a lot of his Mandala shapes. Check out his website: http://mandalacustomshapes.com

Mapping out the fins and concaves...


Lots of sanding...


Finished product:

Deck is flat and rails turn down at 4 inches from each rail.

Rocker...Tail thins down quite a bit.

Bottom...subtle double concaves. 

Hull entry...

Outline...

Can't wait to see how the glass job turns out. He's going to have some fun with these colors...

Until next time.

Stay stoked!

-James

Wednesday, August 12, 2015

Shortbus 2.0 - Part 1

A lot has happened since the last post on here. Moved to a new bigger house (which came with a reeeeally nice big shed)...

2 weeks after moving in our little man Asher Kelly Samaha decided he would come a few weeks early...
So needless to say life's been crazy busy... We love this little guy soooo much! 

After painting about every wall in the new house, updating the kitchen and countless hours of unpacking and organizing I finally got around to setting up the lights in the back of the shed so I can shape again. 

Picked up a stringerless EPS blank from a local shaper and starting mowing foam the other night. Making another Shortbus for meself but this one will have a different thinner tail, a split arc tail to be exact, hoping to add some more maneuverability and hold, the tail and rails on the old one were too fat and sometimes it would slide out the back of the wave. Here's what I've done so far...

The blank...Nice and thick!!!

Outline...

Cut out...

Thinned down the tail...

Rail bands mapped out...

Rocker shot.

That's all for now.

Stay stoked!

-James